Esperanto
Shqiptare
Euskara
Zulu
Latinus
Cymraeg
தமிழ்
Slovak
Slovak
Afrikaans
NEWS


The difference between ordinary fiberboard and Plain MDF
The difference between ordinary fiberboard and Plain MDF
2021-05-31 16:23
Fiberboard is made of plant fibers, which are separated, formed, and heat-pressed (or dried) as a product. There are many ways to classify fiberboard, which can be classified according to raw materials, production methods, density, structure, use, and appearance. Fiberboards can be divided into three categories according to their density: those with a density above 0.8∥cm3 are called hard fiberboards; those with a density of 0.4∥cm3~0.89/cm3 are called semi-rigid fiberboards (0.5∥em3~0). 889/cm3 is called Plain MDF); density below 0.4∥cm3 is called soft fiberboard.

Hard fiberboard has high strength and is mostly used in the decoration of vehicles, ships, and aircraft, as well as in the construction industry and furniture manufacturing industry. Soft fiberboard has the properties of insulation, heat insulation, sound absorption, etc., and is mainly used in construction departments, such as wall panels and ceilings in broadcasting rooms, theaters, etc. Semi-rigid fiberboard is an excellent material for furniture manufacturing and building interior decoration.
There are many production methods for fiberboard, which are divided into two categories: wet method and dry method according to the molding medium. The wet process is currently the main manufacturing process, and its characteristic is that water is used as the medium for fiber transportation and slab forming, and the moisture content of the wet slab after forming is 60% to 70%. The advantage of the wet method is that no adhesive is used, and sometimes a small amount of adhesive is used to further improve product quality.
The characteristic of the dry method is that air is used as the medium for fiber transportation and slab forming, and the moisture content of the slab after forming is only 5%-10%. Due to the lack of moisture in the slab, the pressure and temperature in the hot pressing process alone cannot form sufficient bonding force between the fiber and the fiber, so an adhesive must be added to improve the strength and water resistance of the product.
Plain MDF is produced by dry or wet production processes with a density of 0.5∥em3~O. 889/em3 fiberboard is suitable for the manufacture of furniture, architectural interiors, interiors of vehicles and ships, electrical appliances and musical instrument boxes, etc.
Plain MDF has lower requirements for raw materials than other types of wood-based panels, which opens up a new way for the development of comprehensive wood utilization. The production process of dry-process Plain MDF and dry-process hard fiberboard is basically the same. In the sizing process, Plain MDF has low density and large pores, and it is produced by dry method. Therefore, only the binding force of the fiber itself is far from reaching the requirements of strength and water resistance. This requires the addition of waterproofing agents and The amount of adhesive applied is much higher than that of dry hard fiberboard. The waterproofing agent is mainly liquid paraffin, which is applied after the wood chip cooking treatment, and the applied amount is 0. 3%~1%; Adhesive depends on product use. Indoor products often use urea-formaldehyde resin, which is applied after fiber separation, with a sizing amount of 8% to 12%.
china,Plain,MDF,Plain,MDF,supplier,Plain,MDF
Previous
Next
Previous
Next
Recommended News
Exploring the Versatility of Plain Hardboard in Construction and Decoration
Time of issue:
2024-12-23 09:40:30
Experience the Unmatched Durability of Paper Overlay Plywood: A Comprehensive Guide
Time of issue:
2024-12-22 10:20:30
The Essentials of Plain HDF Supply for the Building and Decorative Materials Industry
Time of issue:
2024-12-21 10:20:50

