Esperanto
Shqiptare
Euskara
Zulu
Latinus
Cymraeg
தமிழ்
Slovak
Slovak
Afrikaans
NEWS


How to judge the quality of customized Edge Banding
How to judge the quality of customized Edge Banding
2021-12-20 10:11
1. Look at the hue and surface roughness of the customized Edge Banding. The color of the surface of a good edge banding is also very important. Whether the color is close to the customized product and is gorgeous. If the surface is very rough and there are pull marks, the quality is definitely not much better. This is the surface quality of the edge banding strip. It has nothing to do with the quality of the inner material of the edge banding, mainly the production process of the edge banding factory and the production technical skills of the employees. A good edge banding strip is: the surface must be smooth, no blistering or seldom bubbling, no stretch or seldom stretch, moderate gloss, not too shiny or too matte (unless there are special requirements).

2. Look at the surface and bottom surface of the customized Edge Banding, whether the thickness is uniform, otherwise it will cause the joint between the edge banding and the board, the glue line is too eye-catching or the gap between the board and the edge banding is too large, which will affect the overall beauty. Details determine success or failure, and often a small detail issue may bring an embarrassing situation where the overall effect is not good.
3. Whether the customized Edge Banding trimming is whitish, whether the surface of the bent edge banding strip is seriously whitish, and whether the bottom color of the trimming strip is close to the surface color of the difficult board. PVC edge banding is mainly made of PVC and calcium carbonate plus additives. If the calcium carbonate content is too high, whitening of the edge banding and bending will occur, which proves that the quality of such products is not good.
4. Look at whether the strength of the customized Edge Banding is okay and whether it has elasticity. High strength means better abrasion resistance, and the corresponding quality is better. Too high strength also means increased processing difficulty. Low elasticity means low wear resistance and low aging resistance. In addition, according to actual production needs, manual trimming is generally required, and soft spots can be appropriately made, and automatic edge banding machines can be appropriately made hard points.
5. Check whether the customized Edge Banding adhesive is evenly applied and whether it is easy to fall off during use.
6. Smell whether the customized Edge Banding tastes or not. Products produced with good quality raw materials generally have a small taste. If the taste is too large, it means that the quality of the raw materials used in production is relatively poor.
customized,Edge,Banding
Recommended News
Exploring the Versatility and Certification of Polyester Plywood OEM
Time of issue:
2024-10-21 10:41:10
Understanding Plain Hardboard in China: Versatility and Applications in Construction
Time of issue:
2024-10-20 10:00:28
Unleash Your Imagination with Paper Overlay Plywood: The Ultimate Guide to Innovative Design
Time of issue:
2024-10-19 10:00:34

