Esperanto
Shqiptare
Euskara
Zulu
Latinus
Cymraeg
தமிழ்
Slovak
Slovak
Afrikaans
NEWS


About Polyester Plywood, which one is better?
About Polyester Plywood, which one is better?
2022-10-31 17:15
Our common sheet core, that is, the base material, is divided into five types: fiberboard, Polyester Plywood, particle board, large core board, and finger joint board. The first three are commonly used to customize furniture such as wardrobes, cabinets, and tables.

The basic unit of fiberboard (density board) is pulverized wood fiber and other plant fibers. Adhesives or additives are applied during the production process, and the board is hot-pressed after drying. The density of the plate will be different when the strength of the hot pressing is different, so it is also called "density board".
According to the density breakdown, it is also divided into low-density fiberboard (light fiberboard), medium-density fiberboard and high-density fiberboard (hard fiberboard). The higher the density, the smaller the thickness, and the stronger the hardness. MDF has multiple uses, among which it is widely used in furniture.
Polyester Plywood (multi-layer solid wood board) is to slice wood into thin boards, and then use adhesive glue to synthesize three or more layers of boards, which is Polyester Plywood. The plywood has an odd number of layers, and three, five, seven, and nine layers are common. The single layer on the surface is called the "surface board", and the single layer on the inner layer is called the "board core".
Particle board (particle board) is made by cutting all kinds of wood, sawdust, etc. into fragments of similar shape, after drying, adding rubber, hardener, and waterproofing agent, and pressing it under a certain temperature and pressure.
From fiberboard to particleboard and then to plywood, they can be distinguished according to their physical state. The smaller the particles of the substrate, the worse the moisture resistance. Therefore, the moisture-proof performance of plywood is the best, and the load-bearing is also the lever~the particleboard is the second, and the fiberboard is the last. Plywood is suitable for use in kitchens and toilets. Because of its characteristics, it can be used for cabinet body and cabinet door.
It seems that it is really difficult to find a suitable one just by looking at the substrate. At this time, the "skin" of the sheet can help it improve these shortcomings. The skin of the board can help the board to enhance the ability of moisture-proof, waterproof and fire-proof, and it can also make the board more beautiful. They are mainly divided into the following four types: solid wood veneer veneer, melamine impregnated adhesive tape film veneer, baking varnish veneer, PVC film veneer veneer.
Solid wood veneer and triamine veneer are actually very similar, so how to distinguish the two?
The wood grain of the melamine board is generally uniform and regular, and it will feel like printing when it is carefully distinguished, and it must be sealed with edge banding. Solid wood veneer, the texture of the veneer surface is formed naturally, without rules.
The solid wood veneer is made by cutting the wood of the log into a thin surface, and is generally classified according to the name of the wood. Because it is pure natural wood, it has the characteristics of natural grain, strong and durable, good water absorption, good air permeability, and also has the fragrance of natural wood.
Triamine finish is to print high-definition lines on decorative paper, and then impregnate it with melamine resin, which can realistically imitate the effects of stone, wood, etc. Because of its fireproof, waterproof, hard, wear-resistant, and pollution-resistant characteristics, it is also called: wear-resistant board, integral board. After being soaked in melamine resin to form a rubber mold paper, it is integrated with the base material by hot pressing. It has good performance and does not need to be pasted with a protective film and painted.
,customized,Polyester,Plywood,material
Recommended News
Exploring the Landscape of China Plain HDF Companies in the Construction Industry
Time of issue:
2024-12-11 09:40:23
Choosing Plain HDF for Your Next Renovation Project: Uncover the Benefits and Expert Tips
Time of issue:
2024-12-10 11:40:01
Understanding Plain Hardboard Supply: A Key Component in Construction and Decorative Materials
Time of issue:
2024-12-09 10:00:34

