Esperanto
Shqiptare
Euskara
Zulu
Latinus
Cymraeg
தமிழ்
Slovak
Slovak
Afrikaans
NEWS


Simple Construction Plywood manufacturers introduce product configuration requirements
Simple Construction Plywood manufacturers introduce product configuration requirements
2023-03-16 16:27
Simple Construction Plywood manufacturers tell you the configuration requirements for plywood formwork.
1. The entire sheet should be used directly to minimize random sawing and waste of plywood.
2. The thickness of wood plywood is generally 16 or 18mm, and the thickness of bamboo plywood is generally 12mm. The distance between inner and outer corrugations can be adjusted according to the thickness of the plywood through design calculations.
3. The support system can use fastener-type steel pipe scaffolding or bowl-buckle-type steel pipe scaffolding. Mixed steel and wood support is strictly prohibited.

4. Vertical formwork such as column walls and beam bottom formwork also use square steel pipes as corrugated wood.
Plywood, logs, decayed, out-of-standard, brittle, severely distorted and easily deformed by moisture shall not be used as flute wood. Column and beam members shall not use angle steel wrap angle instead of secondary corrugation. The specifications of the main corrugated wood of the same material shall not be smaller than that of the secondary corrugated wood.
5. The length of the nail should be 1.5-2.5 times the thickness of the plywood, and at least 2 nails should be nailed at the place where each piece of plywood overlaps with the corrugated wood. The nails of the second board should be nailed obliquely in the direction of the first template to make the joints tight. Iron nails should not be fixed on the side of the plywood. When square steel pipes are used as corrugated wood, steel nails should be used for fixing.
6. The prepared templates should be numbered on the reverse side and the specifications should be written, and they should be stacked and kept separately to avoid misuse.
7.Simple Construction Plywood manufacturers tell you that protective measures should be taken for the second-use formwork to avoid damage during handling, and a water-soluble release agent should be applied before use.
Simple,Construction,Plywood,manufacturers,Cheapest,Simple,Construction,Plywood,Simple,Construction,Plywood,prices
Recommended News
Time of issue:
2021-10-18 17:45:46
What are the advantages and disadvantages of customized HDF Mould Door Skin
Time of issue:
2021-10-10 14:10:34
What are the uses of Plain HDF
Time of issue:
2021-09-30 17:10:49

